MS2N04-B0BTN-BMDH1-NNNNE-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911384526
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N04-B0BTN-BMDH1-NNNNE-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 6,000 min with a Multiturn encoder design. This motor is Equipped with a holding brake, it has a Smooth, no shaft seal shaft, and a M17 Double Plug, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Designed by Bosch Rexroth, the MS2N04-B0BTN-BMDH1-NNNNE-NN synchronous servomotor is equipped with a holding brake. This motor can be operated on foreign converters with pulse width modulation. The product does not provide personnel safety with its holding brake. This device is coated with a one-layer standard varnish. The unit can be installed in an upright position with the output shaft facing upward or downward. Its run-out and concentricity are defined by the accuracy of its flange.
This motor is meant to be grounded using the manufacturer's preassembled connection cable. The product surface should not come into contact with temperature-sensitive components. This device must be worked on by using only VDE tools. The unit supports a standard encoder with 16 signal periods. Its holding brake is activated by the drive controller. This motor depicts continuous operation with S1 operating mode. The product produces torque continuously when it is operated in press machines. This device is RoHS compliant. The unit supports a maximum axial shock load of 100 m/s^2 for 11 ms. Its components have a service life based on the operating conditions.
This motor should be run without load between 800 rpm and 1000 rpm speed for an hour after storage if the bearings are more than a year old. The product has a fixed bearing on its Side B. This device must be commissioned only after removing any transport locks that are present. The unit must be picked up using lifting eyebolts or lifting sling belts. Its permanent magnets have high attraction forces. This synchronous servomotor features a 3K22 operating class according to EN IEC 60721-3-3 specifications.
