MS2N04-B0BTN-BMDH0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911389896
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N04-B0BTN-BMDH0-NNNNN-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 6,000 min with a Multiturn encoder design. This motor is Not Equipped with a holding brake, it has a Smooth, no shaft seal shaft, and a M17 Double Plug, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N04-B0BTN-BMDH0-NNNNN-NN synchronous servomotor from Bosch Rexroth has no radial shaft seal around the output shaft. This motor triggers an impermissibly high bearing reaction if an overdetermined bearing is used. The product may encounter an extremely high load on its output shaft and bearing by the revolving radial force when extremely stiff couplings are fitted. This unit related alignment and coaxially are measured in the vertical position to avoid the influence of gravitational forces. Its output shaft rotates in a clockwise direction.
This motor features high-temperature grease on its bearings for lubrication. This product can be installed either horizontally or vertically in the supporting machinery. This device has a typical sound pressure level ranging for a speed range of 0 rpm to up to the rated speed. The unit supports field weakening operations. Its thermal installation determines the extent of power loss, discharged through the flange. This motor cannot be operated directly on a three-phase network. The product depicts a +/-5% tolerance limit for most of its technical data. This device can be identified by its type designation. The unit must be installed in the machine such that it is easily accessible for maintenance. Its continuous operation curves are based on the DC bus voltage of the drive controller.
This motor deploys a self-cooling action. The product portrays the dissipation of heat loss through natural convection. This device must be worked on using only VDE tools. The unit must not have salt mist on its surface when it is transported. Its electrostatic components should not be touched at their connection points. This synchronous servomotor must be visually inspected for damage-free parts after storage if the bearings are over a month old.
