MS2N04-B0BTN-ASDK0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914000559
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N04-B0BTN-ASDK0-NNNNN-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 6,000 min with a Single-turn encoder design. This motor is Not Equipped with a holding brake, it has a Keyway, with shaft seal shaft, and a M17 Double Plug, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Produced by Bosch Rexroth, the MS2N04-B0BTN-ASDK0-NNNNN-NN synchronous servomotor should not be operated directly on a three-phase network. This motor should be cooled for at least 140 minutes before it is touched. The product must be installed only in the de-energized state. This device belongs to the MS2N series of motors. The unit supports an installation altitude of 0 to 1000 m above sea level. Its output shaft is designed to rotate in a clockwise direction.
This motor uses two cables with M17 connectors for its connection. The product related threshold values for temperature monitoring are stored in its encoder data memory. This device has an output temperature based on the selected encoder. The unit tends to get thermally overloaded because of pollution on its surface. Its encoder uses a capacitive sampling method. This motor incorporates a form-locking transmission of torque. The product has a DS M5 centering hole as per DIN 332 specifications on its output shaft. This device features a displacement of its drive end up to 0.6 mm with respect to the housing because of thermal expansion. The unit has reduced bearing life if the radial and axial forces are exceeded. It has a water-based one-layer varnish on its housing.
This motor is prone to damage due to the ingress of liquids along the output shaft. The product portrays an easy recycling process. This device depicts no function-impairing effects as long as the specified load limits are maintained. The unit related bearings and encoder have to be replaced after a storage period of more than 60 months. It must be commissioned only after taking additional measures to ensure smooth functioning. This synchronous servomotor has a relative humidity between 5% and 75% during transport and storage.
