MS2N04-B0BTN-ASDH1-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914501657
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N04-B0BTN-ASDH1-NNNNN-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 6,000 min with a Single-turn encoder design. This motor is Equipped with a holding brake, it has a Smooth, no shaft seal shaft, and a M17 Double Plug, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N04-B0BTN-ASDH1-NNNNN-NN synchronous servomotor delivered by Bosch Rexroth is a three-phase motor. This motor is energized by a permanent magnet. The product can be operated on converters and inverters of the manufacturer. This device encompasses a plain and smooth output shaft. The unit has a standard design. It is equipped with deep-groove ball bearings to support its operation.
The product should be transmitted only after determining its total weight. This device must be lifted using all its lifting eyebolts that should be tightened before use. The unit is meant to be stored in a light-protected place. It should be taken care that the plant-side receptacle fit is not damaged during its flange assembly. This motor related holding brake cannot be used for personnel protection. The product has a black-colored housing. This device is intended to be handled only after wearing protective gloves. This device portrays a temperature rise of over 60 degrees C on its surface when the operation takes place. The unit has an IP 67 protection rating for its connectors in the connected state. It does not use a fan for the cooling action.
This motor must be used with tackles and lifting sling belts suitable for its weight. The product uses two circular M17 connectors for its connection. This device must be connected with the manufacturer's readymade connection cable. The unit must have a correctly connected flange socket that is prevented from becoming loose before it is commissioned. The servomotors brake voltage rating is 24 VDC +/-10%. This synchronous servomotor must be operated according to the technical data specified in its manual.
