MS2N04-B0BNN-CSSG0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911394152
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N04-B0BNN-CSSG0-NNNNN-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 3,000 min with a Single-turn encoder design. This motor is Not Equipped with a holding brake, it has a Smooth, with shaft seal shaft, and a M23 Single-Cable connection, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Produced by Bosch Rexroth, the MS2N04-B0BNN-CSSG0-NNNNN-NN synchronous servomotor belongs to the MS2N series of such motors. This motor does not have any holding brake. The product depicts vibrations in the form of sinusoidal oscillations in stationary use. This device encounters axial and radial forces when it is in use. The unit can be operated on foreign converters. It portrays a danger of explosion due to overload when it is not operated properly.
This motor incorporates permanent magnets in its rotor. The product comes with eyebolts fitted on its housing to assist in its pickup and movement. This device must be transported after determining its weight. The unit should be stored in a place that is away from direct solar radiation. Its bearings and encoder must undergo a replacement if the storage period is more than five years old. This motor can withstand a maximum axial shock load of 100 m/s² for 11 ms. The product does not have any negative impact on the environment with its operation. This device should be operated in compliance with the general safety instructions mentioned in its manual. The unit must be in the de-energized state before any work is done on it. Its permanent magnets must be demagnetized before disposal.
This motor encompasses a shaft sealing ring around the output shaft. The product is noted for its high performance. This device comes with an additional rating plate that can be fitted onto the machinery in which it is installed. The unit supports field weakening operation with the manufacturer's drive controller. It depicts low inertia. This synchronous servomotor has high energy efficiency.
