MS2N04-B0BNN-CMSH0-NNNNN-GE080N2040AN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911388176
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N04-B0BNN-CMSH0-NNNNN-GE080N2040AN-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 3,000 min with a Multiturn encoder design. This motor is Not Equipped with a holding brake, it has a Smooth, no shaft seal shaft, and a M23 Single-Cable connection, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth MS2N04-B0BNN-CMSH0-NNNNN-GE080N2040AN-NN synchronous servomotor is energized by a permanent magnet. This motor is suitable for operation on the manufacturer's inverters and converters. The product has a protection mode according to EN 60034-5 specifications. This device features deep-groove ball bearings with permanent grease lubrication. The unit deploys a self-cooling action. It should be free of salt mist on its surface.
This motor incorporates a standard PT1000 temperature sensor. The product has an increased lifespan with regular cleaning and checks. This device houses an encoder with an optical sampling method. The unit has a frontal centering hole with a DS thread on its cylindrical shaft end. It must be used only with gearboxes that have a closed or oil-tight lubrication system. This motor must be fitted with drive elements on the output shaft by using axially compensated couplings. The product has reduced bearing life when the permissible force limits are exceeded. This device must not have fluid accumulation around the output shaft with the IM V3 mounting style. The unit portrays continuous operation with S1 operating mode. Its performance data is reduced when the operation takes place outside the specified ambient conditions.
This motor can be coated with an additional paint layer of a maximum thickness of 40 um. The product should not be operated without a proper grounding connection. This device allows field weakening operation with the appropriate drive controller. The unit has a reduction factor of 0.95 at 60K. Its ctrlX drive controller portrays an uncontrolled DC bus voltage of 3 x 400 VAC. This synchronous servomotor has a tolerance limit of +/-10% for the inertia of its rotor.
