MS2N04-B0BNN-BSDH0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911387280
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The MS2N04-B0BNN-BSDH0-NNNNN-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 3,000 min with a Single-turn encoder design. This motor is Not Equipped with a holding brake, it has a Smooth, no shaft seal shaft, and a M17 Double Plug, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N04-B0BNN-BSDH0-NNNNN-NN from Rexroth is an AC servo motor that is part of the MS2N04 lineup of motors which is designed to be low inertia with a high speed and medium levels of output rated torque. The rated speed of this particular servo model is 3000 rpm while offering a nominal rated torque of 6.4 Nm at the temperature of 20 degrees Celsius and a reduced torque output of 5.9 Nm at 100 Kelvin change.
To operate this servo motor, the MS2N04-B0BNN-BSDH0-NNNNN-NN requires anywhere between 169 volts AC to 480 Volts AC to operate. A compatible power supply capable of providing a nominal current rating of at least 4.9 Amperes is required to ensure the smooth operation of this servo motor. This servo motor also supports EMC line filter capacitors to ensure a regulated power supply with the minimum amount of ripples in the output to ensure an efficient operation. To help keep the MS2N04-B0BNN-BSDH0-NNNNN-NN cool, this servo motor relies on self-natural convection cooling where the ambient air is used to help cool the motor enclosure. To keep the motor within the operating temperature conditions, the MS2N04-B0BNN-BSDH0-NNNNN-NN must be installed and operated in an area with an operating temperature between 0 degrees Celsius to 40 degrees Celsius.
This AC Asynchronous servo motor comes with the standard single-turn absolute encoder that uses the Hiperface interface and generates 128 pulses for one single rotation of the shaft to notify one complete rotation. The Hiperface encoder requires 7 volts DC to 12 volts DC to operate and consumes approximately 250 mA of current per slave device. This encoder works according to the EIA-485 parameters.
