MS2N03-D0BYN-CSSK0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911388434
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N03-D0BYN-CSSK0-NNNNN-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 9,000 min with a Single-turn encoder design. This motor is Not Equipped with a holding brake, it has a Keyway, with shaft seal shaft, and a M23 Single-Cable connection, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N03-D0BYN-CSSK0-NNNNN-NN synchronous servomotor by Bosch Rexroth can be identified by the type designation on its type plate. This motor does not have any hazardous materials that have a drastic impact on the environment. The product fails to run if the connected drive controller is faulty or the supply voltage is missing. This device encompasses KTY84 temperature monitoring sensors in its windings. The unit should not have increased vibrations during the transportation process. Its lifting eye bolts must be secured in place before use. This motor must be transported and stored only in the horizontal orientation.
The product should be stored at a temperature between -20 degrees C and 60 degrees C. This device must be disconnected from the power supply and secured against restart before any work is done on it. The unit relies on a rotatable M23 connector with a SpeedCon lock for its electrical connection. Its flange sockets must be protected from external force effect. This motor does not use a fan for its cooling action. The product has no holding brake. This device needs a cleaning of its cooling fins to be done at regular intervals. The unit has a reduced lifespan for its bearings if it is operated at a very high temperature. It comes with protective caps and sleeves on the output shaft and connectors.
This motor is manufactured using energy-optimized production processes. The product is likely to vibrate if its mounting screws are loose. This device features protection against overload. The unit must be commissioned only after ensuring that its flange sockets are connected correctly. Its connectors must be attached in compliance with the general installation conditions. This synchronous servomotor takes up minimum space in the machine in which it is installed because of its compact construction.
