MS2N03-D0BYN-CMSH0-NNNNN-GE060N1005BN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911402700
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N03-D0BYN-CMSH0-NNNNN-GE060N1005BN-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 9,000 min with a Multiturn encoder design. This motor is Not Equipped with a holding brake, it has a Smooth, no shaft seal shaft, and a M23 Single-Cable connection, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N03-D0BYN-CMSH0-NNNNN-GE060N1005BN-NN synchronous servomotor offered by Bosch Rexroth has a smooth output shaft and no holding brake. This motor features a rotatable electrical connector and a single cable connection. This product is capable of meeting diverse modern automation requirements. The device is associated with a multi-turn encoder supporting multiple revolutions. This unit should be worked on using only VDE tools. Its vertical axis must be secured against falling after it is switched off.
This motor must not be handled by people with metallic implants or pacemakers. The product is not meant to be used in the damaged state. This device is energized by a permanent magnet. The unit can be operated on the manufacturer's inverter or converter. Its connectors have an IP 67 protection rating in the connected state. This motor encompasses deep-groove ball bearings with grease lubrication throughout their lifetime. The product must be installed in the machine such that there is unhindered dispersion of hot air. This device must be transported in compliance with the ESD safety measures. The unit should be stored in dry and rainproof rooms. Its lifting eyebolts must be secured in place before use.
This motor should be visually inspected for damage-free cables and connectors if the bearings are more than a month old after storage. The product uses M4 x 20 screws with a tightening torque of 3 Nm for the mounting process. This device can be fitted with transmission elements by using the centering hole on the output shaft and suitable equipment that has to be heated if needed. The unit should be de-energized and grounded before working on it. Its plug connector should not be connected or disconnected under load. This synchronous servomotor must be connected with the manufacturer's readymade cables for this purpose.
