MS2N03-D0BYN-BMDH0-NNNNE-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911384770
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N03-D0BYN-BMDH0-NNNNE-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 9,000 min with a Multiturn encoder design. This motor is Not Equipped with a holding brake, it has a Smooth, no shaft seal shaft, and a M17 Double Plug, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N03-D0BYN-BMDH0-NNNNE-NN synchronous servomotor offered by Bosch Rexroth is designed using environment-friendly materials. This motor must be properly transported, stored, assembled, and connected for safe and optimum operation. The product features an electrically-releasing holding brake. This device allows the rotation of its power and encoder connectors for a maximum of 10 times. The unit should be connected with only the manufacturer's readymade connection cables. Its plug connectors must be connected or disconnected only in the de-energized state. This motor is meant to be commissioned only with the drive controller and control unit.The product must be cooled down before maintenance. This device can have unfavorable consequences because of insufficient heat radiation. The unit should always be replaced by a motor of the same type. It must be fitted with its protective covers before storage. This motor fails to run if the connected drive controller is faulty.
The product should be properly grounded before it is operated. This device has a nameplate on its housing. The unit is manufactured using resource-optimized production processes. Its output shaft must be protected with a shim when pulling-off tools are used.This motor has no negative impact on the environment. The product needs a bearing replacement to be done after 30,000 hours of operation. This device can cause burns if it is touched without protective gloves when its surface is hot. The unit should be checked for cleanliness during the operation phase. It is meant to be installed according to the general installation conditions. This synchronous motor relies on a standard encoder for its feedback.
