MS2N03-B0BYN-CMSH0-NNNNN-GM060N1007BN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911402046
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N03-B0BYN-CMSH0-NNNNN-GM060N1007BN-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 9,000 min with a Multiturn encoder design. This motor is Not Equipped with a holding brake, it has a Smooth, no shaft seal shaft, and a M23 Single-Cable connection, turnable electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N03-B0BYN-CMSH0-NNNNN-GM060N1007BN-NN synchronous servomotor supports a maximum relative air humidity of 75% at 30 degrees C during its transportation. This motor must be placed at a distance of at least 100 mm from adjacent components for unhindered vertical convection. The product can be mounted vertically with the output shaft facing downwards or upwards. This device is UL Listed and CSA Certified. The unit can be operated on the manufacturer's converters and inverters. It is energized by a permanent magnet.
This motor comes with an additional rating plate and protective covers as well as instructions on use and safety notes. The product must be touched after operation only when it has cooled down completely. This device produces strong magnetic and electromagnetic fields when it is in use because of its permanent magnets. The unit must be switched on only after establishing a fixed connection of the protection conductor as per the interconnection diagram. It may trigger electric shock because of improper use. This motor should be serviced only by authorized personnel. The product withstands a maximum shock load of 100 m/s^2 for 11 ms. This device should be stored in a dry place away from direct solar radiation. The unit must be transported only after ensuring that its lifting eyebolts are tightened and secured in place. Its permanent magnets must be demagnetized before disposal.
This motor can be operated on foreign converters with pulse width modulation and a pulse frequency of 4 kHz to 16 kHz. The product encounters vibrations in the form of sine-wave oscillations with stationary use. This device has a Class F insulation or 155 thermal class. The unit depicts a diameter of 4.5 mm for its mounting holes. It is suitable for dynamic applications with maximum acceleration capacity. This synchronous servomotor has a surface temperature of more than 60 degrees C when in use.
