MS2E07-E0CNN-CSSK0-NNNNN-NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911395492
The Bosch Rexroth Indramat MS2E07-E0CNN-CSSK0-NNNNN-NN is a 3-phase permanent magnet motor in the MS2E Synchronous Servomotors series. It features self-cooling, an advanced ACUROlink encoder system with a 20-bit singleturn resolution, and a nominal speed of 3000 revolutions per minute. The motor has IP65 protection with a shaft sealing ring, a flange size of 140 mm, and uses a keyway shaft type with a single cable M23 rotatable connection.
Internal Product Review
The MS2E07-E0CNN-CSSK0-NNNNN-NN is a Bosch Rexroth Indramat 3~ PM synchronous servomotor with self-cooling and a low-inertia rotor design. The Advanced Performance ACURO®link encoder and 20-bit singleturn resolution support highly accurate feedback for precise motion control. ATEX compliance makes this motor an especially strong choice for demanding installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2E07-E0CNN-CSSK0-NNNNN-NN is a three-phase permanent-magnet synchronous servomotor produced by Bosch Rexroth Indramat for the MS2E Synchronous Servomotors series. It delivers precise torque and position control for equipment such as pick-and-place axes, packaging stations, and conveyor drives within industrial automation cells. The motor features a low-inertia rotor for fast acceleration, an advanced ACUROlink encoder connection for high-bandwidth feedback, and a single-cable power and feedback interface that reduces cabinet complexity. These features support responsive motion while limiting the amount of wiring required between the drive and motor.
The nominal speed can reach 3000 rpm, allowing controllers to synchronize high-speed motion profiles without mechanical gearing. Continuous operation is supported at ambient temperatures from 0 to 40 °C without derating. Thermal energy is removed through self-cooling, so no external blower or liquid circuit is required; this simplifies maintenance and keeps the enclosure intact. The housing has an ingress protection rating of IP65, meaning dust is fully excluded and water jets will not compromise the internal components. Precise electronic commutation is supported by an ACUROlink sensor with a resolution of 20 bits per revolution, providing 1,048,576 counts for fine angular feedback. The high feedback resolution allows the connected drive to detect small changes in rotor position during controlled movement.
Mounting follows the B5 / IM3001 pattern, and the flange measures 140 mm across with a 165 mm hole circle for direct attachment to gearboxes or machine frames. The encoder is a single-turn absolute encoder, meaning absolute position is available within one mechanical revolution. For installations that require fail-safe stopping, an external holding device must be used because the motor is supplied without a holding brake. The motor is ATEX compliant for use in applicable hazardous-area installations. A deep-groove ball bearing set supports the shaft and helps maintain mechanical stability under radial and axial loading. The motor also has a 130 mm centering collar and a keyed shaft fitted with a sealing ring, which helps separate lubricant from external contaminants. Operation is permitted at altitudes up to 1,000 m above sea level.
