MS2E07-C0BNN-CSSG0-NNNNN-NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914501248
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MS2E07-C0BNN-CSSG0-NNNNN-NN is a 3-phase permanent magnet motor from the MS2E Synchronous Servomotors series. It operates at a nominal speed of 3000 rpm and is equipped with an advanced performance ACUROlink singleturn encoder system with 20-bit resolution. The servomotor features a self-cooling design, IP65 protection with a shaft sealing ring, and uses a rotatable M23 single cable connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2E07-C0BNN-CSSG0-NNNNN-NN is a three-phase permanent-magnet servomotor manufactured by Bosch Rexroth Indramat within the MS2E Synchronous Servomotors series. It serves as a rotary actuator in industrial automation systems that demand precise speed and position control. The motor has size code 07 and frame length C, which establish its physical footprint, while its low-inertia rotor supports rapid acceleration in pick-and-place modules, packaging stations, and similar motion axes.
The unit delivers a nominal speed of 3000 rpm when operated with self-cooling, which removes heat through the housing without fans. Position feedback is provided by an Advanced Performance ACUROlink encoder with a 20-bit single-turn resolution, allowing the drive to determine the absolute position within one mechanical revolution. Encoder data and motor power share a single rotatable M23 connector, simplifying cabling and allowing the connection angle to suit the installation. The enclosure meets IP65 and uses a shaft sealing ring to keep dust and water jets away from internal components. The motor is ATEX compliant, enabling operation in designated hazardous areas, and reliable output is maintained at installation altitudes from sea level to 1,000 m. Standard deep-groove ball bearings support the applicable radial and axial loads during continuous operation.
Continuous operation is supported at ambient temperatures from 0 to 40 °C without derating, while the RAL 9005 varnish coating resists humidity and chemical exposure. The B5 / IM3001 flange interface has a centering collar diameter of 130 mm, a flange size of 140 mm, and a mounting hole circle of 165 mm drilled for 11 mm bolts. Standard flange accuracy supports alignment with compatible gearboxes and machine mounting surfaces. A smooth shaft transfers torque through a clamping coupling, and the absence of a holding brake helps reduce rotating mass. Winding temperature is monitored by a PT1000 sensor, allowing the connected drive to respond to excessive heat through derating or shutdown controls.
