MS2E04-B0BNN-CMSG1-NNNNN-NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914503445
The Bosch Rexroth Indramat MS2E04-B0BNN-CMSG1-NNNNN-NN is part of the MS2E Synchronous Servomotors series and features a nominal speed of 3000 revolutions per minute and self-cooling design. It offers IP65 protection with a shaft sealing ring and uses an advanced performance ACUROlink multiturn encoder system. The motor is fitted with a standard deep-groove ball bearing and has a holding torque of 5.00 Newton meters.
Internal Product Review
The MS2E04-B0BNN-CMSG1-NNNNN-NN is a Bosch Rexroth Indramat 3~ PM synchronous servomotor built for precise motion applications. Low rotor inertia and a nominal speed of 3000 rpm give the motor crisp dynamic response in demanding servo axes. The Advanced Performance ACUROlink encoder with 20-bit singleturn resolution is a standout feature for high-accuracy feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2E04-B0BNN-CMSG1-NNNNN-NN belongs to the MS2E Synchronous Servomotors series from Bosch Rexroth Indramat. Classified as a three-phase permanent-magnet motor, it provides closed-loop rotary motion for positioning axes and feed drives in industrial automation. The motor converts regulated electrical power into controlled torque while its encoder supplies the drive with position data. This arrangement supports accurate acceleration, deceleration, and load positioning in automated machinery.
This motor reaches a nominal speed of 3000 rpm, while its low-inertia rotor keeps response times short during rapid motion cycles. The electrically released holding brake supplies 5.00 Nm of static torque, allowing the shaft to remain fixed during idle periods or after drive power is removed. Position feedback is generated by an Advanced Performance ACUROlink multi-turn encoder with a 20-bit single-turn resolution. The encoder tracks up to 4096 mechanical revolutions, preserving absolute position information across an extended movement range. Protection against dust and water jets is rated at IP65. A self-cooling housing dissipates motor heat without an auxiliary blower, while deep-groove ball bearings support the rotor under normal radial and axial loading. An integrated PT1000 sensor monitors motor temperature, and ATEX compliance permits installation in applicable hazardous areas when all associated installation requirements are satisfied.
The motor can operate within an ambient temperature range of 0 to 40 °C and at altitudes of up to 1,000 m without derating. Its B5 / IM3001 mounting flange has a square dimension of 82 mm and a centering collar diameter of 50 mm. A 95 mm bolt circle and 6.6 mm mounting holes support attachment to compatible gearboxes or machine frames. The rotatable M23 single-cable connector carries power, brake, and encoder signals through one lead, reducing the number of separate connections required at the motor. The motor has a smooth shaft with a sealing ring, frame length code B, motor size code 04, and standard flange accuracy. Its exterior has a low-gloss RAL 9005 black varnish that protects the housing surface in industrial installations.
