MS2E03-B0BYN-CMSG0-NNNNN-NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911400005
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MS2E03-B0BYN-CMSG0-NNNNN-NN is part of the MS2E Synchronous Servomotors series and features a nominal speed of 9000 revolutions per minute. This 3-phase permanent magnet motor is IP65 rated with a smooth shaft and self-cooling design. It uses an advanced ACUROlink multiturn encoder system offering 20-bit resolution and supports single cable connection with a rotatable M23 connector.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2E03-B0BYN-CMSG0-NNNNN-NN is a three-phase permanent-magnet servo motor manufactured by Bosch Rexroth Indramat within the MS2E Synchronous Servomotors series. Designed for closed-loop positioning tasks in automated assembly and packaging equipment, it converts drive current into precise mechanical motion. The unit follows the B5 / IM3001 mounting standard, has a 58 mm flange, and uses a smooth shaft with a shaft sealing ring. Standard deep-groove ball bearings support the rotor, while a 40 mm centering collar helps maintain concentric alignment during installation.
The motor’s feedback assembly uses an Advanced Performance ACUROlink multi-turn encoder, providing 20-bit single-turn resolution and tracking absolute position across 4096 revolutions. A permissible mechanical speed of 9000 rpm supports high-speed operation with the controller’s velocity loop. A PT1000 sensor embedded in the stator reports the winding temperature to the connected drive. The enclosure reaches an ingress protection rating of IP65 through its sealed housing and shaft sealing ring, while a RAL 9005 varnish protects the exterior. Power, signal, and brake conductors share a rotatable M23 single-cable connector that allows the cable exit direction to be adjusted for the installation. The mechanical interface has a 63 mm bolt circle and 4.5 mm mounting holes. Frame length code B is combined with motor size code 03, and the flange uses the standard accuracy class for this motor series.
Heat is dissipated through self-cooling airflow across the motor housing, eliminating the need for a separate fan or liquid-cooling circuit. The low-inertia rotor supports rapid acceleration and responsive positioning under changing motion commands. The motor is supplied without a holding brake, so an external brake or drive-generated torque must retain suspended loads when the axis is stopped. The assembly is ATEX compliant for use in applicable explosive atmospheres when installed and operated according to the required safety conditions. Continuous rated output is available from sea level to an elevation of 1,000 m above mean sea level. The permitted ambient operating temperature is 0 to 40 °C without derating within the stated elevation range.
