MMD012A-030-EG1-CN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911286775
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
41 Seconds
The Bosch Rexroth Indramat MMD012A-030-EG1-CN is part of the MMD Synchronous Motors series and has an output power of 100 W with a nominal speed of 3000 min-1. The motor features an IP65 protection class, a plain shaft with an 8 mm diameter, and includes a holding brake with brake power supplied at 24V and 0.4A. It uses an incremental encoder with a resolution of 2,500 increments, and weighs 0.73 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MMD012A-030-EG1-CN is a compact synchronous motor built by Bosch Rexroth Indramat for the MMD Synchronous Motors series. As a servo element, it converts drive current into precise rotary motion for miniature positioning axes and pick-and-place modules in industrial automation. The unit has a 45 mm flange for mounting to gearheads or plates, while its plain 8 mm shaft provides smooth torque transmission to the load.
Its continuous stall capability is 0.32 Nm, permitting stable holding and low-speed motion without overheating, and at the rated speed of 3000 min⁻¹ the motor supplies a mechanical output of 100 W. An integrated holding brake supplies 1.3 Nm of static torque to secure vertical loads, and the brake is suitable for operation up to 1000 m above sea level. The enclosure has an IP65 rating, which helps protect the motor against dust and water jets during operation. During dynamic operation, the motor can reach a theoretical speed limit of 5000 min⁻¹, where the electromagnetic system can briefly deliver 0.95 Nm. Thermal behavior is influenced by the 30 mm centering boss that guides heat into the mounting surface, and winding code 030 matches the motor’s electrical values to compatible Indramat digital drives. A plain 25 mm shaft with a sealing ring helps keep lubricant inside the gearhead interface.
It uses a brake coil rated at 24 V / 0.4 A and is released by an electrical command, allowing rapid brake disengagement when motion is required. Position feedback is provided by an incremental encoder with 2,500 increments per revolution, supplying the drive controller with fine resolution for velocity loops. System responsiveness is also supported by the low rotating mass; the assembled rotor and brake have a total weight of 0.73 kg and an inertia of 0.067 × 10⁻⁴ kg·m². The short A-length housing keeps the motor envelope compact, so multiple axes can fit in dense machine layouts without clearance conflicts.
Frequently Asked Questions about MMD012A-030-EG1-CN:
Q: Does the MMD012A-030-EG1-CN motor come with a holding brake, and what is its brake torque?
A: The MMD012A-030-EG1-CN includes a holding brake with a brake torque of 1.3 Nm for secure position retention.
Q: What is the protection rating of the MMD012A-030-EG1-CN?
A: This motor features an IP65 protection class, providing complete protection against dust and low-pressure water jets.
Q: What is the highest speed the MMD012A-030-EG1-CN can achieve?
A: The maximum theoretical speed of this model is 5000 min-1.
Q: What type and resolution of encoder does the MMD012A-030-EG1-CN have?
A: The MMD012A-030-EG1-CN uses an incremental encoder with a resolution of 2,500 increments.
Q: What is the continuous standstill torque specification for the MMD012A-030-EG1-CN?
A: The continuous torque at standstill for this model is 0.32 Nm.
