Product Description:

The MHP115C-058-HG1-AFNNNN is a synchronous servo motor produced by Bosch Rexroth Indramat and assigned to the MHP Synchronous Motors series. Designed for closed-loop drive systems, it converts supplied three-phase power into regulated mechanical torque for gantries, packaging stations, and metal-cutting tables. Feedback-based operation helps the connected drive maintain accurate position and speed during repeated motion cycles. This makes the motor suitable for automated equipment that requires dependable response, stable torque production, and continuous industrial service.

The motor can sustain a continuous standstill load of 70.0 Nm when cooled by natural convection, which supports strong holding force without an external fan. A liquid cooling housing circulates coolant through the stator jacket to remove additional heat during demanding cycles and maintain a compact frame size. Position information comes from an incremental encoder with 2048 increments, providing motion data for commutation and precise closed-loop control. The mechanical envelope corresponds to motor size 115, and the electromagnetic design uses winding code 058. Length designation C places the active stack in the mid-range of the series, and the power leads exit through a connector on side A for straightforward cable routing.

The windings use insulation class F, which permits elevated operating temperatures within the motor’s thermal system. Operation is specified for ambient temperatures from 0 to +40 °C before derating, so the unit is intended for standard indoor industrial conditions. The enclosure meets IP65, helping keep dust and low-pressure water jets away from internal components. Mechanical output is transferred through a plain shaft with a sealing ring, which supports secure coupling installation and helps keep contaminants away from the bearing area. A built-in holding brake secures the axis when power is removed.