Product Description:

The MHP115C-024-HP0-ANNNNN belongs to the MHP Synchronous Motors series produced by Bosch Rexroth Indramat. This motor, which has size 115 and length code C, is intended for rotary axis duties in automated machines where steady velocity and torque control are required. When paired with a compatible drive controller, it converts inverter output into controlled shaft rotation for positioning, conveying, or cutting tasks in industrial automation cells. It is suited to applications that require repeatable motion rather than simple constant-speed operation.

Its standstill capability reaches 70.0 Nm of continuous torque at standstill. Cooling is provided by Natural Convection, so the motor operates without forced ventilation. The enclosure carries a protection category of IP65, so sealed joints block dust ingress and low-pressure water jets during washdown routines. Operation is specified for surroundings between 0 to +40 °C; outside that range, thermal limits can be exceeded. Internal windings are insulated to class F, supporting permissible winding temperatures up to 155 °C before degradation.

Motion feedback is delivered by an incremental encoder with 2048 increments, enabling the drive to close high-resolution position loops without external transducers. The drive shaft is a keyed shaft with a sealing ring, giving positive torque transmission while the seal helps limit lubricant migration along the journal. The shaft seal also helps protect the bearing area from contaminants in typical machine environments. For applications that rely on dynamic braking or gravity counterbalance, note that the motor is supplied without a holding brake, so external mechanical restraints must be provided. The power conductors exit through a connector mounted on side A, matching layouts that route cables from the motor's front face. The 024 winding code is intended for use with compatible Indramat inverters.