MHP115C-024-HG0-BNNNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911309585
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
28 Seconds
The Bosch Rexroth Indramat MHP115C-024-HG0-BNNNNN is part of the MHP Synchronous Motors series and features a plain shaft with sealing ring and a motor size of 115. This motor provides a continuous torque at standstill of 70.0 Nm and utilizes natural convection for housing. It is equipped with an incremental encoder with 2048 increments and is rated for IP65 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHP115C-024-HG0-BNNNNN is a three-phase permanent-magnet synchronous motor produced by Bosch Rexroth Indramat for the MHP Synchronous Motors series. Designed as the mechanical drive element in CNC stations, packaging lines, and material-handling axes, it delivers commanded rotation with high positional fidelity when paired with a compatible Indramat drive. The motor supplies direct shaft power without external gearing, and its sealed construction supports continuous service in oil-mist, dust, or coolant-rich work cells typical of industrial automation. Its permanent-magnet design also supports responsive speed and position control during repeated indexing and steady-state operation.
It generates a continuous standstill torque of 70.0 Nm under natural convection, allowing constant force output while the rotor is locked or moving slowly. Operation is permitted within an ambient temperature range of 0 to +40 °C, so surrounding air must remain within that window during use. The housing carries an IP65 rating, which protects internal components from dust ingress and low-pressure water jets. Position data is supplied by an incremental encoder with 2048 increments, providing fine feedback resolution for closed-loop drives. Thermal endurance is supported by an insulation class F system that tolerates winding temperatures up to 155 °C, while the natural-convection housing removes heat without forced airflow.
A plain shaft with sealing ring couples the motor to machinery while helping prevent lubricant escape and contaminant entry. The motor uses motor size 115 with length code C, giving a compact installation envelope with predictable mounting geometry in multi-axis frames. Its electrical configuration uses winding code 024, allowing the associated drive to apply the proper current characteristics for this motor. Because the unit is supplied without a holding brake, any vertical axis must rely on an external clamping method or drive-applied holding torque when the load must remain stationary. Power conductors exit through a connector on side B, which can simplify cable routing when the harness is positioned on that side of the machine.
Frequently Asked Questions about MHP115C-024-HG0-BNNNNN:
Q: What is the allowed operating temperature range for the MHP115C-024-HG0-BNNNNN motor?
A: The MHP115C-024-HG0-BNNNNN is rated to operate in ambient temperatures from 0 to +40°C.
Q: How much continuous torque can the MHP115C-024-HG0-BNNNNN motor deliver at standstill?
A: This motor can provide a continuous torque of 70.0 Nm at standstill with natural convection cooling.
Q: What type of drive shaft does the MHP115C-024-HG0-BNNNNN feature?
A: The drive shaft is a plain shaft equipped with a sealing ring for this model.
Q: Is a holding brake included with the MHP115C-024-HG0-BNNNNN motor?
A: This model does not include a holding brake.
Q: What type of motor feedback system is used in the MHP115C-024-HG0-BNNNNN?
A: The MHP115C-024-HG0-BNNNNN uses an incremental encoder with 2048 increments for motor feedback.
