MHP115C-024-HG0-AFNNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911321508
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
32 Seconds
The Bosch Rexroth Indramat MHP115C-024-HG0-AFNNNN is part of the MHP Synchronous Motors series and features a plain drive shaft with sealing ring. This motor has a continuous torque at standstill of 70.0 Nm with natural convection and uses liquid cooling. It provides incremental encoder feedback with 2048 increments and is rated for an ambient temperature range of 0 to 40°C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHP115C-024-HG0-AFNNNN is a synchronous servo motor manufactured by Bosch Rexroth Indramat in the MHP Synchronous Motors series. It has a 115 mm frame and the C length code, giving the unit a mid-size format that suits enclosed machine axes and general automation equipment. The motor is used for rotary positioning and speed-regulated duties where closed-loop response and compact mounting are required on production lines and automated handling cells. When paired with a suitable servo drive, it converts commanded current into controlled shaft motion for repeatable starts, stops, and speed changes.
At standstill and under natural convection, the motor delivers 70.0 Nm of continuous torque, providing stable low-speed force without thermal overload. The stator jacket supports liquid cooling, so circulating coolant can remove heat during demanding duty cycles. An enclosure rating of IP65 seals the interior against dust ingress and water jets. Position feedback is supplied by an incremental encoder with 2048 increments, giving the drive controller fine resolution for velocity and position loops. Approved ambient conditions extend from 0 to +40 °C, keeping the motor within its intended operating range. This feedback arrangement supports controlled acceleration, stable speed regulation, and accurate stopping during repetitive motion.
The mechanical interface uses a plain shaft with a sealing ring, reducing leakage paths when coupled to gearboxes or belt drives. The unit is delivered without a holding brake, so loads that must remain fixed at standstill require electrical holding torque or an external brake. Power and feedback leads exit through a connector on side A, which can simplify cable routing in compact axis layouts. The winding system uses Class F insulation, allowing the internal insulation system to tolerate winding temperatures up to 155 °C. This motor carries winding code 024 for high base-speed operation, and its connection layout supports orderly installation in tightly packed motion modules.
Frequently Asked Questions about MHP115C-024-HG0-AFNNNN:
Q: What is the supported ambient temperature range for the MHP115C-024-HG0-AFNNNN motor?
A: The MHP115C-024-HG0-AFNNNN operates within an ambient temperature range of 0 to +40°C.
Q: What is the continuous standstill torque provided by the MHP115C-024-HG0-AFNNNN?
A: This model delivers a continuous standstill torque of 70.0 Nm with natural convection.
Q: What type of drive shaft does the MHP115C-024-HG0-AFNNNN motor feature?
A: The MHP115C-024-HG0-AFNNNN comes equipped with a plain shaft featuring a sealing ring.
Q: What kind of motor feedback is used in the MHP115C-024-HG0-AFNNNN?
A: This motor is equipped with an incremental encoder providing 2048 increments for feedback.
Q: What cooling method is utilized by the MHP115C-024-HG0-AFNNNN motor?
A: The MHP115C-024-HG0-AFNNNN features a liquid-cooled housing design.
