Product Description:

The MHP115B-058-HP0-ANNNNN is a synchronous servo motor built by Bosch Rexroth Indramat and supplied within the MHP Synchronous Motors series. The unit converts electrical energy into controlled rotary motion for positioning and velocity tasks in industrial automation systems such as packaging stations, gantries, and transfer lines. When integrated with compatible Indramat drive controllers, the motor delivers repeatable torque and speed profiles required for coordinated multi-axis operation. This configuration suits applications that depend on consistent servo response during repeated start-stop cycles.

At standstill, the motor can supply 50.0 Nm of continuous torque when cooled only by natural convection. This rating indicates the sustained force available for holding or slowly accelerating a load without auxiliary fans. Size 115 and length code B provide a medium frame with moderate inertia, while winding code 058 corresponds to electrical characteristics suited to Indramat power modules in the 300 V DC link class. Position data is returned through a 2048-increment incremental encoder, allowing fine interpolation by the controller during closed-loop operation. The housing has an IP65 protection category, which helps prevent dust ingress and allows the motor to tolerate water-jet exposure during routine washdown.

The specified ambient window of 0 to +40 °C limits installation to controlled production areas where natural cooling remains effective. A keyed shaft with a sealing ring transmits torque to couplings while helping block oil migration from the gearbox side. F-class insulation gives the windings a temperature limit near 155 °C before degradation becomes likely. The power leads exit through a connector on side A, which can simplify cable routing along the machine frame. The design omits a holding brake, so vertical axes may require an external holding method when power is removed.