MHP115B-058-HG1-BNNNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911310532
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
20 Seconds
The Bosch Rexroth Indramat MHP115B-058-HG1-BNNNNN is part of the MHP Synchronous Motors series and features an IP65 protection category with insulation class F. This motor includes a plain shaft with sealing ring, a holding brake with a torque of 70.0 Nm, and an incremental encoder with 2048 increments. It provides 50.0 Nm of continuous torque at standstill with natural convection, and operates in ambient temperatures from 0 to 40°C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHP115B-058-HG1-BNNNNN is a synchronous servo motor produced by Bosch Rexroth Indramat within the MHP Synchronous Motors series. This rotary unit is intended to deliver position and velocity control for automated machinery such as handling gantries, packaging equipment, and machining centers. By converting drive current from a compatible inverter into controlled mechanical torque, it serves as the active element of closed-loop motion axes in industrial automation. Its operating profile suits applications that require repeatable acceleration, steady running, and accurate stopping during frequent motion cycles.
Under natural convection cooling, the motor develops a continuous standstill torque of 50.0 Nm, allowing it to sustain static loads without overheating. For dynamic stops and power-off holding, the integrated brake provides a torque reserve of 70.0 Nm. Rotor and stator position feedback is supplied by an incremental encoder with 2048 increments, giving the drive controller fixed-resolution velocity and position data for precise regulation. The housing is sealed to IP65, which helps keep dust and low-pressure water jets away from internal components. Electrical characteristics are grouped under winding code 058, which indicates the resistance and inductance values used by compatible Rexroth drive amplifiers. The natural-convection housing, motor length B, and connector on side B support straightforward cable routing while leaving the cooling surfaces unobstructed.
Installation is permitted in an ambient range of 0 to +40 °C, so the unit can be mounted in standard shop environments without derating. The windings use insulation class F, which supports a maximum conductor temperature of 155 °C during proper operation. A frame size of 115 matches mid-torque machine axes, while the plain shaft with sealing ring helps protect the bearing area from contamination and supports coupling to driven equipment. The power lead exits on side B, which can simplify harness layout when the opposite side must remain clear for surrounding machine components.
Frequently Asked Questions about MHP115B-058-HG1-BNNNNN:
Q: What is the continuous standstill torque of the MHP115B-058-HG1-BNNNNN motor?
A: This model provides a continuous torque of 50.0 Nm at standstill with natural convection cooling.
Q: What is the holding brake torque for the MHP115B-058-HG1-BNNNNN?
A: The MHP115B-058-HG1-BNNNNN is equipped with a holding brake rated at 70.0 Nm.
Q: What type of feedback does the MHP115B-058-HG1-BNNNNN motor utilize?
A: This motor uses an incremental encoder with 2048 increments for feedback.
Q: What kind of drive shaft is included with the MHP115B-058-HG1-BNNNNN?
A: The drive shaft on this model features a plain shaft with a sealing ring for added protection.
Q: What protection rating does the MHP115B-058-HG1-BNNNNN motor have?
A: The MHP115B-058-HG1-BNNNNN has an IP65 protection rating.
