MHP115B-024-HP0-ANNNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911316973
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
2 Seconds
The Bosch Rexroth Indramat MHP115B-024-HP0-ANNNNN is a synchronous motor in the MHP Synchronous Motors series. It features a continuous torque of 50.0 Nm at standstill with natural convection housing and utilizes an incremental encoder with 2048 increments for motor feedback. The motor offers IP65 protection, insulation class F, and uses a keyed shaft with sealing ring.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHP115B-024-HP0-ANNNNN is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MHP Synchronous Motors series. It serves as a drive element in industrial automation where rapid acceleration, accurate positioning, and continuous-duty rotation are required on packaging machinery, material-handling systems, and gantry axes. In this role, the motor converts drive-controlled electrical power into precise rotary motion for closed-loop axis control.
At standstill, the motor can sustain 50.0 Nm of continuous torque while being cooled by natural convection. The cast aluminum housing has an IP65 rating, which helps prevent dust ingress and protects against low-pressure water jets on open machine frames. Thermal resilience is supported by an insulation system rated to Class F, allowing winding temperatures up to 155 °C without loss of dielectric strength. Ambient operation is permitted from 0 to +40 °C, and operation outside that range requires current derating to limit internal heating. Size code 115 identifies the stator diameter, while length code B indicates a longer active iron stack that supports higher torque density. A connector on side A carries the three-phase power conductors, which helps simplify parallel installation beside adjoining motors in a multi-axis system.
Mechanical coupling is through a keyed shaft with a sealing ring, and the unit is supplied without a holding brake, so load-side equipment must provide static clamping if power-off retention is required. Position feedback is delivered by an incremental encoder with 2048 increments, which provides fine resolution for digital drives that interpret A/B/Z channels. The electromagnetic circuit uses winding code 024, matching the resistance and inductance used by compatible Bosch Rexroth drive modules. This combination supports accurate speed regulation and repeatable positioning during normal machine operation.
Frequently Asked Questions about MHP115B-024-HP0-ANNNNN:
Q: What is the continuous standstill torque of the MHP115B-024-HP0-ANNNNN motor?
A: The MHP115B-024-HP0-ANNNNN features a continuous standstill torque of 50 Nm with natural convection cooling.
Q: What type of drive shaft does the MHP115B-024-HP0-ANNNNN have?
A: This model is equipped with a keyed shaft and a sealing ring for secure mechanical connection and additional protection.
Q: What kind of motor feedback system is used in the MHP115B-024-HP0-ANNNNN?
A: The MHP115B-024-HP0-ANNNNN uses an incremental encoder with 2048 increments for motor feedback.
Q: What insulation class does the MHP115B-024-HP0-ANNNNN synchronous motor have?
A: This motor belongs to insulation class F, ensuring reliable insulation properties under standard operating conditions.
Q: What protection category is provided by the MHP115B-024-HP0-ANNNNN motor?
A: The MHP115B-024-HP0-ANNNNN offers protection at IP65 level, guarding against dust and water jets.
