Product Description:

The MHP115B-024-HG0-ANNNNN is a synchronous servo motor manufactured by Bosch Rexroth Indramat as part of the MHP Synchronous Motors series. In automated machinery, it supplies commanded torque and speed to positioning axes, allowing repeatable motion profiles without mechanical backlash or overshoot. Its synchronous design supports accurate acceleration and deceleration during closed-loop motion control.

Under natural convection cooling, the motor can deliver a continuous standstill torque of 50.0 Nm, giving it the capacity to hold or drive medium-inertia loads without overheating. Reliable service is maintained within an ambient range of 0 to +40 °C; operation outside this window may require derating or external cooling. An enclosure rated at IP65 shields internal components from dust and low-pressure water jets, permitting installation on open machine frames. Windings built with F-class insulation tolerate elevated internal temperatures during cyclic duty. Winding code 024 indicates the electrical resistance and inductance used for this variant, balancing current demand against available drive voltage. The motor uses size 115 geometry with the B length option, and its housing relies on natural convection fins rather than forced airflow.

Feedback resolution is supplied by an incremental encoder with 2048 increments, enabling the controller to close high-gain position loops and detect minute velocity changes. A plain shaft with a sealing ring presents a smooth coupling surface while blocking lubricant migration through the front bearing. Power conductors exit through a connector on side A, simplifying cable runs in cabinets arranged to the right of the axis. The motor is shipped without a holding brake, so any static load must be held by the drive or external mechanics when power is removed.