MHP115A-058-HP0-ANNNNN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911318338
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MHP115A-058-HP0-ANNNNN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a Shaft with Key and Sealing Ring shaft and windings of 58. This motor is also Not Equipped with a holding brake and has an Incremental encoder.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHP115A-058-HP0-ANNNNN motor finds its place among the several MHP series of digital AC motors from Bosch Rexroth. The primary black coat of this synchronous motor is resistant to yellowing, weathering, and chalking. The device features a shaft with a shaft sealing ring and keyway according to DIN 6885-1 specifications. This shaft helps in the form-fitting transmission of torque. The maximum permissible radial force of the unit is based on the shaft break load. The allowed axial force is proportional to the permitted radial force. The power connection for the product encompasses a connection for a holding brake and a temperature sensor.
The motor comes with standard power cables for connecting to intermediate plug-in points as well as direct connections. The maximum length of the cable with two such plug-in points to connect the device to the controller is 75 meters. The power connectors of the unit can either be soldered or crimped. Its windings feature an inductance of 2.88mH. The product has a mass of 30kg. The motor comes with a theoretical maximum torque of 110Nm. The device comes with a type-plate fitted on its housing. It should always be stored and transported in a horizontal position.
The synchronous motor should always be kept dry without any load during transport. The unit must be lifted using the appropriate crane and related accessories. Its tapped holes can accommodate M8 ring screws for lifting the motor using a chain tackle. The device is intended to operate between 0°C and +40°C. The plastic sleeves on the shaft and connectors should be removed only after the motor is mounted. The motor should be mounted only after ensuring that all parts are clean. The plug-in connectors must be firmly seated in position when the installation is in process. The MHP115A-058-HP0-ANNNNN unit can be dispatched worldwide and is supported by a one-year warranty.
