MHP115A-024-HP1-BNNNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911324934
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
30 Seconds
The Bosch Rexroth Indramat MHP115A-024-HP1-BNNNNN belongs to the MHP Synchronous Motors series and features a keyed shaft with a sealing ring and a holding brake with a torque of 70.0 Nm. It offers 32.0 Nm of continuous torque at standstill with natural convection housing and is rated for an ambient temperature range of 0 to 40°C. This motor is equipped with an incremental encoder at 2048 increments and has IP65 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHP115A-024-HP1-BNNNNN is an AC synchronous servo motor produced by Bosch Rexroth Indramat as part of the MHP Synchronous Motors series. With a frame size of 115 and length code A, the unit serves closed-loop motion tasks such as conveyor indexing, gantry axes, and press drives in industrial automation. It converts electrical power into controlled torque and speed for accurate positioning on servo-driven axes. Because it is a synchronous design, the motor responds quickly to current commands from a compatible servo drive. This makes it suitable for repeated start-stop cycles and coordinated motion profiles. An integrated holding brake helps keep the shaft in place when the drive is disabled or power is removed.
Under continuous stall conditions the motor produces 32.0 Nm of torque for applications that require steady holding force at zero speed. A spring-applied brake delivers up to 70.0 Nm, which helps secure vertical or suspended loads when the axis is not energized. Operation is permitted from 0 to +40 °C, and the enclosure is rated IP65 to resist dust and low-pressure water jets. The windings use Class F insulation, which supports elevated internal temperatures without reducing electrical isolation. Within this ambient range, the motor can be used in enclosed machines as long as surrounding heat remains controlled.
The motor uses a keyed shaft with a sealing ring to transfer torque to the driven load while helping keep contaminants away from internal parts. Cooling is handled by natural convection, so the housing can dissipate heat without an external blower or liquid circuit. For commutation and speed feedback, the motor uses an incremental encoder with 2048 increments, and the stator is built with the 024 winding code for use with matching Indramat drives. Power enters through a connector on side B, which keeps the cable exit on one side of the housing and can simplify routing in compact multi-axis installations.
Frequently Asked Questions about MHP115A-024-HP1-BNNNNN:
Q: What type of drive shaft does the MHP115A-024-HP1-BNNNNN motor have?
A: This motor includes a keyed shaft with a sealing ring for secure mechanical coupling and added protection.
Q: What is the holding brake torque of the MHP115A-024-HP1-BNNNNN motor?
A: The holding brake on this model provides a torque of 70.0 Nm for load retention during standstill.
Q: What motor feedback system is used in the MHP115A-024-HP1-BNNNNN?
A: The MHP115A-024-HP1-BNNNNN motor uses an incremental encoder with 2048 increments for position feedback.
Q: What level of protection does the MHP115A-024-HP1-BNNNNN motor offer?
A: The protection category of IP65 means this motor is protected against dust and low-pressure water jets from any direction.
Q: What is the continuous standstill torque of the MHP115A-024-HP1-BNNNNN motor?
A: This model achieves a continuous standstill torque of 32.0 Nm when cooled by natural convection.
