Product Description:

The MHP115A-024-HP0-ANNNNN is a synchronous motor manufactured by Bosch Rexroth Indramat as part of the MHP Synchronous Motors series. The device functions as the electromechanical element in servo drive systems, generating torque under command from a compatible drive controller so that automated machinery can follow precise speed and position profiles. With its 115 frame size and type-A length, it supports medium- to high-power axes used in assembly lines, printing stations, and general motion platforms. This arrangement suits machines that require repeated starts, stops, and controlled reversals during normal operating cycles.

At standstill the motor can supply 32.0 Nm of continuous torque when cooled only by surrounding air. This rating is achieved with a housing that relies on natural convection, permitting installation without external blowers in cabinets or open frames. Operation remains thermally stable within an ambient range of 0 to +40°C. Internal windings use class F insulation, allowing permissible winding temperatures up to 155 °C before aging accelerates. The casing carries an ingress rating of IP65, safeguarding the stator and feedback components against dust and low-pressure water jets. Because cooling does not depend on a separate fan, the motor can be fitted where surrounding space is limited and airflow paths are simple.

Position accuracy comes from an incremental encoder that delivers 2048 increments per revolution, providing fine resolution for velocity loops. Mechanical energy is transferred through a keyed shaft with a sealing ring, and the power leads exit through a connector on side A for consistent cable routing inside machines. Winding code 024 indicates the electrical resistance and inductance values used by the drive. The motor is supplied without a holding brake, allowing back-driving in applications that use external clamping. This layout supports compact machine designs that need direct motor coupling and orderly cable routing.