Product Description:

The MHP115A-024-HG0-BNNNNN is a synchronous motor built by Bosch Rexroth Indramat for integration into the MHP Synchronous Motors series. In an automation cell, it operates as the electromechanical actuator that positions machine axes. Encoder feedback is sent to a matching drive controller for closed-loop speed and position regulation, which helps the axis respond accurately to commanded motion.

With a continuous standstill capability of 32.0 Nm, the motor can hold load torque at zero speed while relying on heat dissipation from its housing. Its enclosure carries the IP65 rating, so dust ingress and water jets do not affect internal windings or bearings. Position data are generated by an incremental encoder that supplies 2048 increments, allowing the controller to resolve motion down to fractions of a mechanical degree. This feedback supports accurate position tracking during indexing and low-speed movement. The electromagnetic package follows winding code 024, which indicates the resistance and inductance values expected by compatible drives. Physical frame size 115 establishes the flange diameter and bolt circle, allowing the motor to fit gearboxes or direct-drive mounts that use that frame.

For proper service life, the unit should operate between 0 to +40 °C ambient; outside this window, derating or external cooling is required. A plain shaft with a sealing ring transfers torque while helping keep contaminants away from the front bearing. Windings use F-class insulation, tolerating internal temperatures up to 155 °C during intermittent peaks without degrading the enamel system. The natural convection housing removes heat without fans, so installation must allow free airflow. The motor does not include a holding brake, and the power connector is oriented toward side B. Its A length code sets the overall stack height.