MHP112C-058-HG3-ANNNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911309790
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
51 Seconds
The Bosch Rexroth Indramat MHP112C-058-HG3-ANNNNN is part of the MHP Synchronous Motors series and features a protection rating of IP65 with insulation class F. This motor has a continuous torque at standstill of 38.0 to 43.5 Nm and comes with a holding brake providing 70.0 Nm of brake torque. It is equipped with a plain drive shaft with sealing ring and an incremental encoder with 2048 increments for motor feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHP112C-058-HG3-ANNNNN synchronous motor is produced by Bosch Rexroth Indramat for the MHP Synchronous Motors series. It functions as a drive element that transforms controlled three-phase energy into repeatable rotary motion for pick-and-place modules, indexing conveyors, and other position-controlled stations across automated lines. As part of a closed-loop servo axis, the motor couples directly to gearboxes or load shafts, delivering the accuracy demanded by modern PLC-driven equipment. This arrangement lets the drive regulate speed and position accurately during repetitive machine cycles.
In continuous duty, the motor can hold a load with a standstill torque from 38.0 to 43.5 Nm when the housing relies on natural convection cooling. A built-in holding brake delivers 70.0 Nm of static torque, so vertical or suspended loads stay fixed after power is removed. Position feedback is provided by an incremental encoder with 2048 increments, which supplies a high-resolution quadrature signal to the drive controller. The motor has an IP65 protection rating, allowing installation in areas exposed to dust and low-pressure water jets. Power enters through a connector on side A, keeping service access on one face of the cabinet.
It operates in ambient temperatures from 0 to +40 °C, matching typical control cabinet climates. The windings use insulation class F, so temperatures up to 155 °C are permitted without degrading the insulation system. Electromagnetic parameters follow winding code 058, and the mechanical frame uses motor size 112 with motor length C and a plain shaft with a sealing ring that helps block lubricant migration. Because the unit has no active cooling hardware, the installation position must allow free air circulation around the housing. Cable routing for the brake and feedback uses the same connector geometry as the power supply, which helps simplify layout inside the machine enclosure.
Frequently Asked Questions about MHP112C-058-HG3-ANNNNN:
Q: What type of holding brake does the MHP112C-058-HG3-ANNNNN feature?
A: The MHP112C-058-HG3-ANNNNN motor includes a holding brake with 70.0 Nm of braking torque for secure stopping and holding operations.
Q: What is the continuous standstill torque capability of the MHP112C-058-HG3-ANNNNN?
A: Continuous torque at standstill for this motor ranges from 38.0 to 43.5 Nm when operating with natural convection cooling.
Q: What motor feedback system is used in the MHP112C-058-HG3-ANNNNN?
A: This motor is equipped with an incremental encoder providing 2048 increments for feedback.
Q: What is the configuration of the drive shaft on the MHP112C-058-HG3-ANNNNN motor?
A: The drive shaft of this model is a plain shaft with a sealing ring for reliable coupling and protection.
Q: What protection category does the MHP112C-058-HG3-ANNNNN motor meet?
A: The MHP112C-058-HG3-ANNNNN is rated for IP65 protection, providing full dust protection and resistance to low-pressure water jets.
