MHP112C-024-HP0-ANNNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911287587
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
48 Seconds
The Bosch Rexroth Indramat MHP112C-024-HP0-ANNNNN is part of the MHP Synchronous Motors series and features a continuous torque at standstill of 38.0 to 43.5 Nm with natural convection housing. The motor has a keyed drive shaft with sealing ring, IP65 protection, and an incremental encoder with 2048 increments for feedback. It is built with insulation class F and operates in ambient temperatures from 0 to 40 degrees Celsius.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHP112C-024-HP0-ANNNNN is a synchronous servo motor produced by Bosch Rexroth Indramat within the MHP Synchronous Motors series. It is intended for machine axes that require precise speed, torque, and position control through a compatible servo drive. In automated production cells, the motor can be coupled to precision gearboxes or belt drives so commanded motion is transferred accurately to the load. This arrangement allows the controller to correct speed deviations quickly and keep repeated motion cycles consistent. Its permanent-magnet design supports responsive operation on positioning, indexing, and speed-controlled applications.
Under natural convection cooling, the motor supplies a continuous standstill torque of 38.0 to 43.5 Nm, which indicates the steady load it can hold at zero speed without exceeding its thermal limit. Torque is transmitted through a keyed shaft with a sealing ring, providing positive mechanical engagement while helping keep contaminants away from internal components. Position and velocity feedback come from an incremental encoder with 2048 increments, giving the drive fine signal resolution for closed-loop regulation. That feedback arrangement supports accurate commutation as well as stable speed control during acceleration and deceleration. The housing has an IP65 protection rating against dust and low-pressure water jets, and the insulation system is rated to Class F. The motor uses length code C.
The unit is intended for ambient conditions of 0 to +40 °C, so the surrounding air must remain within that range during operation. It has motor size 112, which suits installations built around that mounting pattern and frame class. The specified frame size also helps match the motor to existing machine interfaces without changing the basic mounting geometry. The electrical design uses winding code 024, matching the voltage and current characteristics expected by the associated drive. Power cables connect through a connector on side A, which can simplify routing when the machine layout favors that cable direction. The motor is supplied without a holding brake.
Frequently Asked Questions about MHP112C-024-HP0-ANNNNN:
Q: What type of drive shaft does the MHP112C-024-HP0-ANNNNN motor have?
A: The MHP112C-024-HP0-ANNNNN features a keyed drive shaft with a sealing ring for secure coupling and dust resistance.
Q: What is the protection category of the MHP112C-024-HP0-ANNNNN motor?
A: This motor has a protection rating of IP65, making it resistant to dust and low-pressure water jets.
Q: What ambient temperature range is supported by the MHP112C-024-HP0-ANNNNN?
A: The MHP112C-024-HP0-ANNNNN operates within an allowed ambient temperature range of 0 to +40°C.
Q: What type of motor feedback does the MHP112C-024-HP0-ANNNNN offer?
A: This model is equipped with an incremental encoder providing 2048 increments for motor feedback.
Q: What is the continuous standstill torque of the MHP112C-024-HP0-ANNNNN with natural convection?
A: The continuous torque at standstill for this motor ranges from 38.0 to 43.5 Nm when naturally cooled.
