MHP112B-024-HG0-BNNNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911297060
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
29 Seconds
The Bosch Rexroth Indramat MHP112B-024-HG0-BNNNNN is part of the MHP Synchronous Motors series and has a motor size of 112 and length B. It features an IP65 protection category, insulation class F, and a plain shaft with sealing ring. The motor includes an incremental encoder with 2048 increments and is designed for operation in ambient temperatures from 0 to 40 degrees Celsius.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHP112B-024-HG0-BNNNNN is a synchronous servo motor manufactured by Bosch Rexroth Indramat as part of the MHP Synchronous Motors series. It converts controlled drive current into rotational motion for automated positioning tasks on packaging lines, material-handling gantries, and similar industrial axes. The motor is intended for servo-controlled applications that require repeatable speed regulation and accurate axis movement over frequent duty cycles. Its synchronous design allows the connected drive to maintain commanded motion through closed-loop control.
This motor operates in ambient temperatures from 0 to +40 °C, so the surrounding installation must keep the housing within that range during operation. Under natural cooling, it produces a continuous standstill torque between 28.0–31.0 Nm, providing steady holding force for static loads and low-speed positioning. The mechanical interface is a plain shaft with a sealing ring, allowing direct coupling while helping protect the bearing cavity from lubricant loss and contamination. Heat is removed solely by natural convection, which eliminates the need for an external blower or liquid circuit. Because cooling is passive, the machine layout should leave enough open space around the housing surfaces for heat dissipation. Its enclosure carries an IP65 protection rating that resists dust and water jets, while the size 112 frame and length code B set the overall mounting envelope.
For applications that rely on drive torque rather than mechanical locking, the unit is supplied without a holding brake. Windings are insulated to Class F, which supports the motor's thermal capability during normal servo operation. An incremental encoder with 2048 increments transmits position data to the controller for commutation and speed feedback during closed-loop control. Performance is matched to compatible servo inverters by the winding code 024. Power is routed through a single-cable connector mounted on side B of the housing, and this arrangement helps keep external wiring compact.
Frequently Asked Questions about MHP112B-024-HG0-BNNNNN:
Q: What is the allowable ambient temperature range for the MHP112B-024-HG0-BNNNNN motor?
A: The MHP112B-024-HG0-BNNNNN operates within an ambient temperature range of 0 to +40°C.
Q: What is the continuous torque at standstill for the MHP112B-024-HG0-BNNNNN with natural convection?
A: This model provides a continuous torque at standstill of 28.0 to 31.0 Nm with natural convection cooling.
Q: What type of motor feedback does the MHP112B-024-HG0-BNNNNN motor feature?
A: The MHP112B-024-HG0-BNNNNN uses an incremental encoder with 2048 increments for motor feedback.
Q: Does the MHP112B-024-HG0-BNNNNN include a holding brake?
A: This motor is manufactured without a holding brake.
Q: What kind of drive shaft does the MHP112B-024-HG0-BNNNNN motor use?
A: The MHP112B-024-HG0-BNNNNN has a plain shaft with a sealing ring for its drive shaft.
