MHP112A-024-HG0-ANNNNN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911292997
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MHP112A-024-HG0-ANNNNN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a Plain Shaft with Sealing Ring shaft and windings of 24. This motor is also Not Equipped with a holding brake and has an Incremental encoder.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHP112A-024-HG0-ANNNNN digital motor is manufactured by Bosch Rexroth and can be operated in conjunction with one of the POWERDRIVE drive controllers from the manufacturer. This motor is cooled by natural convection during use. The device is intended to operate between an ambient temperature range of 0°C and 45°C. It has chances of getting damaged if it is operated outside this temperature range. The unit features a relative humidity of 20% to 30%. The feedback and power connections of the product must be mounted correctly to avoid danger to personnel and property damage. The motor has a B05 structural shape for flange mounting. The device must be protected from penetration by liquids if it is installed vertically with the driven shaft facing upwards.
The primary coat of the AC motor is resistant to diluted acids and caustic solutions. The product features a theoretical maximum torque of 54Nm. The device also comes with a peak current of 41.4A. It comes with a winding code of 058. The unit should not be deployed for stamping or pressing applications when it is fitted with blowers. The bearing service life gets reduced due to extensive shaft loads. The maximum permitted radial load of the motor is dependent on the shaft break load. The bearings have a nominal service life of 30,000 operating hours as per ISO 281 standards. The product comes with a warranty tag for a year.
This device features a plain driven shaft that is fitted with a shaft sealing ring. This unit has a mass of 23kg. The product is equipped with an IP 65 degree of protection. The motor supports a thermal time constant of 90 minutes at 60K. Its windings have 155°C maximum temperature. The installation of the device should not exceed an elevation of 1,000m above sea level. The MHP112A-024-HG0-ANNNNN synchronous motor can be dispatched to any international destination. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
