MHP095C-058-HP0-ANNNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911318204
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
53 Seconds
The Bosch Rexroth Indramat MHP095C-058-HP0-ANNNNN is part of the MHP Synchronous Motors series and uses a keyed shaft with a sealing ring. This model has a continuous torque at standstill of 23.0 to 28.0 Nm with natural convection cooling, and features an incremental encoder for motor feedback. It has IP65 protection, insulation class F, and operates in ambient temperatures from 0 to 40°C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHP095C-058-HP0-ANNNNN is a synchronous motor from Bosch Rexroth Indramat in the MHP Synchronous Motors series. It converts electrical input into controlled rotary motion for indexing, transfer, and positioning tasks in automated equipment. Its natural-convection housing suits position and velocity control on packaging lines, gantry axes, and material-handling stations. The keyed shaft transfers torque to the load, and the sealing ring helps protect the front bearing. Incremental feedback hardware and the drive-side connector interface allow the motor to work with digital drive controllers for automated motion tasks.
The motor delivers a continuous standstill torque of 23.0 to 28.0 Nm when cooled exclusively by natural convection. This is the sustained twisting force available without exceeding thermal limits. Its sealing and gasket system provide the IP65 rating, so dust is kept out and low-pressure water jets do not affect the internal windings. Rotor position is reported by an incremental encoder that generates 2048 increments per revolution, giving the drive fine resolution for speed loops. This supports smooth low-speed regulation and repeatable response during start-stop cycles. Electrical design variant 058 indicates the resistance and inductance values expected by the servo amplifier. Torque is transmitted through a keyed shaft with a sealing ring, which supports slip-free coupling while helping keep lubricant inside the housing.
The power connector is oriented to side A, so wiring can remain within the machine envelope. Operation is permitted from 0 to +40 °C, and insulation class F allows winding temperatures up to 155 °C during duty cycles. Size code 095 sets the flange pattern, while length code C increases the active stack to raise torque without enlarging the footprint. Because the motor has no holding brake, stationary load retention must be handled by the drive or external mechanics. This matters when the axis must remain fixed after power removal. Cooling depends solely on natural convection, so installation clearances should be observed for airflow.
Frequently Asked Questions about MHP095C-058-HP0-ANNNNN:
Q: What type of motor feedback does the MHP095C-058-HP0-ANNNNN provide?
A: The MHP095C-058-HP0-ANNNNN motor is equipped with an incremental encoder that provides 2048 increments for feedback.
Q: What is the continuous standstill torque rating for the MHP095C-058-HP0-ANNNNN?
A: This model can produce a continuous torque at standstill ranging from 23.0 to 28.0 Nm with natural convection cooling.
Q: What is the shaft configuration of the MHP095C-058-HP0-ANNNNN motor?
A: The drive shaft on this motor features a keyed design with a sealing ring for effective power transmission and shaft sealing.
Q: How is the MHP095C-058-HP0-ANNNNN motor cooled?
A: The housing uses natural convection for cooling and does not require forced ventilation.
Q: What is the protection category of the MHP095C-058-HP0-ANNNNN motor?
A: This motor model has an IP65 protection rating, ensuring it is dust-tight and protected against water jets.
