Product Description:

The MHP095C-058-HG1-ANNNNN synchronous motor is manufactured by Bosch Rexroth Indramat within the MHP Synchronous Motors series. Designed as an electromechanical actuator, it converts drive current into precise rotary motion for indexing tables, pick-and-place heads, and similar automation axes. Integrated feedback and a sealed housing allow the controller to regulate speed and position while the machine operates in dusty or spray-laden areas. When paired with compatible digital drives, the motor supports dynamic acceleration on production equipment that requires repeatable motion. Its sealed exterior also allows placement closer to the process area than open-vented motors that rely on direct airflow through the housing.

Under continuous load, the motor delivers 23.0 to 28.0 Nm of standstill torque when cooled only by ambient airflow, which indicates the sustained output available for holding or low-speed moves without added fans. A spring-applied holding brake rated at 22.0 Nm secures vertical or overhung loads whenever power is removed. Cooling relies on natural convection through the ribbed housing, and the enclosure has an IP65 rating to block dust ingress and water jets. Position feedback is provided by an incremental encoder with 2048 increments, allowing the drive to close position loops with high repeatability. The plain shaft with a sealing ring accepts suitable couplings and helps prevent oil migration.

The thermal design and Class F insulation let the stator operate safely up to 155 °C while ambient conditions stay within 0 to +40 °C. Electrical power is routed through a connector on side A, which can simplify cable routing when the motor is placed close to the drive chain. Size code 095 and length code C create a compact envelope that supports use where installation space is limited. This frame length gives the motor a moderate body depth for compact axis layouts. Winding code 058 matches the electrical characteristics expected by compatible Indramat controllers.