Product Description:

The MHP095C-058-HG0-ANNNNN is a synchronous servo motor from the MHP Synchronous Motors series manufactured by Bosch Rexroth Indramat. Within an automation cell, this motor interfaces with a compatible digital drive to supply closed-loop torque and speed, letting axes follow precise motion profiles required for material handling, converting, or machining equipment. Its operating layout suits repeated starts, stops, and speed changes where accurate feedback is needed for stable motion control.

At standstill, the motor can deliver a continuous torque of 23.0 to 28.0 Nm, a range intended for natural convection cooling. Operation is approved across an ambient span of 0 to +40 °C, so full output is maintained in typical shop-floor climates. A sealing system rated IP65 blocks dust ingress and low-pressure water jets, enabling direct machine mounting outside electrical cabinets. Windings use class F insulation, which supports elevated internal temperatures without premature aging. Rotor position is reported by an incremental encoder that resolves 2048 increments per revolution, giving the drive fine feedback for velocity and position loops. The unit ships without a holding brake, so static load retention must be provided by drive torque or external clamping when required.

The motor uses winding code 058, which sets the electrical values expected by the matching drive. It has motor size 095 with length designation C, giving a housing format suited to this torque class. A plain shaft with a sealing ring helps protect the motor interior while providing a straightforward mechanical output interface. Power cabling exits toward side A, which can simplify routing in parallel multi-axis installations.