MHP095C-035-HG1-BNNNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911315305
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
52 Seconds
The Bosch Rexroth Indramat MHP095C-035-HG1-BNNNNN is part of the MHP Synchronous Motors series and features a continuous torque at standstill from 23.0 to 28.0 Nm with natural convection housing. It has a plain shaft with a sealing ring, an integrated holding brake providing 22.0 Nm torque, and offers IP65 protection. The motor uses an incremental encoder with 2048 increments for feedback and operates within temperatures from 0 to 40°C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHP095C-035-HG1-BNNNNN is a synchronous servo motor manufactured by Bosch Rexroth Indramat as part of the MHP Synchronous Motors series. It is intended for integration with Indramat drive controllers to provide precise speed and position control in industrial automation. The 095 frame and C length give the motor a compact footprint while still meeting medium-torque duties, and the 035 winding code matches the electrical output of MHD and HDS drive modules. Typical roles include indexing stations, pick-and-place axes, and packaging machinery where repeatable rotary motion is required.
Under natural cooling, the motor produces a continuous standstill torque of 23.0 to 28.0 Nm, allowing it to hold loads without overheating when the shaft is locked. A built-in brake supplies an additional holding force of 22.0 Nm, so vertical or suspended axes remain fixed after power is removed. Rotor position is reported by an incremental encoder that delivers 2048 increments per revolution, supplying the drive with high-resolution feedback for velocity and position loops. The enclosure meets the IP65 protection rating, blocking dust ingress and low-pressure water jets in washdown areas. Reliable operation is permitted at ambient temperatures from 0 to +40 °C, covering most control cabinet and on-machine installations.
Heat is removed only through the aluminum frame because the motor uses natural convection, so no external fan or liquid circuit is required. Mechanical power is transferred through a plain shaft with a sealing ring, which helps prevent lubricant leakage at the output end. The power connector is oriented toward the rear through a connector on side B, simplifying parallel mounting of multiple motors. Electrical insulation follows Class F, supporting winding temperatures up to 155 °C during repetitive-duty cycles.
Frequently Asked Questions about MHP095C-035-HG1-BNNNNN:
Q: What type of feedback does the MHP095C-035-HG1-BNNNNN motor provide?
A: The MHP095C-035-HG1-BNNNNN motor uses an incremental encoder with 2048 increments for feedback.
Q: Does the MHP095C-035-HG1-BNNNNN motor have a holding brake and what is its torque?
A: This model is equipped with a holding brake that supplies a braking torque of 22.0 Nm.
Q: What is the continuous standstill torque of the MHP095C-035-HG1-BNNNNN under natural convection?
A: The MHP095C-035-HG1-BNNNNN supports a continuous torque at standstill from 23.0 to 28.0 Nm when cooled naturally.
Q: What type of drive shaft does the MHP095C-035-HG1-BNNNNN motor use?
A: This motor features a plain shaft with a sealing ring for secure and protected mechanical connection.
Q: What protection category applies to the MHP095C-035-HG1-BNNNNN motor?
A: The MHP095C-035-HG1-BNNNNN has a protection rating of IP65, making it resistant to dust and low-pressure water jets.
