Product Description:

The MHP095C-035-HG0-BNNNNN is a three-phase permanent-magnet synchronous servo motor built by Bosch Rexroth Indramat within the MHP Synchronous Motors series. It converts electrical input from an Indramat drive into controlled torque and speed for precision motion in packaging lines, gantry axes, and CNC feed drives. By supplying closed-loop rotary power without mechanical transmission slack, the unit helps automated equipment hold position accurately and accelerate quickly between working points. Its servo design also suits applications that require repeatable starts, stops, and short settling times under changing load conditions.

At standstill and with natural cooling, the motor can deliver a continuous torque of 23.0 to 28.0 Nm, a range that reflects production tolerance within the winding set. A plain shaft with a sealing ring transfers torque while helping prevent oil from entering the bearing chamber. Heat is removed through the finned housing by natural convection, and the enclosure has an IP65 rating to resist dust and low-pressure water jets. Position and speed data come from an incremental encoder with 2048 increments, giving the drive detailed feedback for interpolation and stable commutation. That feedback also lets the drive correct small position deviations during indexing and contouring moves. The motor uses length C, has no holding brake, and comes in a standard housing.

For system wiring, power conductors terminate at a connector on side B, allowing cables to stay clear of linear guides on the opposite face. Continuous operation is permitted in ambient temperatures from 0 to +40 °C, and insulation class F helps the winding system remain stable during cyclic thermal loading. The side-mounted connection can also simplify harness separation between power leads and nearby machine components. Frame size 095 identifies the flange and pilot diameter used across the product group, while winding code 035 indicates the electrical constants expected by the Indramat drive. This arrangement supports orderly cable routing and consistent mechanical fit in servo installations.