Product Description:

The MHP093C-058-HG1-BNNNNN is an AC synchronous servo motor produced by Bosch Rexroth Indramat within the MHP Synchronous Motors series. It converts three-phase drive current into accurately regulated rotation for automated handling modules, packaging axes, and tooling spindles, where precise velocity control and rapid positioning are required. This operating role lets the motor respond quickly to changing commands from a matched drive while maintaining smooth motion through repeated cycles. In these applications, it supports both point-to-point movement and steady-speed operation without requiring a large installation footprint.

At standstill, the motor delivers a continuous torque of 23.0 to 28.0 Nm, allowing stable shaft output when the axis is held in position by the controller. For static safety during power-off conditions, a holding brake is included; it clamps the rotor with 20.0 Nm so vertical or load-bearing axes can remain stationary. The enclosure carries an IP65 protection rating, which keeps dust out and resists water jets during operation near process equipment. Mechanical coupling is through a plain shaft with a sealing ring that helps limit lubricant migration while transferring torque. Position data are supplied by an incremental encoder with 2048 increments, supporting precise drive feedback and repeatable positioning.

The thermal design uses natural convection, so heat leaves the housing without forced airflow and operation remains within an ambient range of 0 to +40°C. Windings built to insulation class F withstand internal temperatures up to 155 °C, supporting repeated duty under cyclic loading. The electromagnetic configuration identified by winding code 058 matches torque constant and resistance to compatible Bosch Rexroth drives. The motor has size 093 with length code C, and the power connector is oriented toward side B for compact cable routing in confined machine layouts.