MHP093C-058-HG0-BNNNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911285677
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
17 Seconds
The Bosch Rexroth Indramat MHP093C-058-HG0-BNNNNN is part of the MHP Synchronous Motors series and features a motor size of 093 and a length C housing designed for natural convection. It provides a continuous torque at standstill between 23.0 to 28.0 Nm and uses an incremental encoder for motor feedback with 2048 increments. The motor includes a plain shaft with sealing ring, has an insulation class F, and is rated for IP65 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHP093C-058-HG0-BNNNNN is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MHP Synchronous Motors series. It is intended for integration with Rexroth digital drive controllers, where it delivers commanded torque and speed to indexing tables, pick-and-place axes, or feed rolls that require repeatable positioning under PLC supervision. This servo motor is suited to applications that depend on accurate starts, stops, and speed changes during repetitive machine cycles. The C-length frame and 093 size set the electromagnetic stack height and flange dimensions, while the power connector is oriented to side B to simplify cable routing toward the cabinet.
The motor supplies a continuous standstill torque of 23.0 to 28.0 Nm when cooled only by ambient airflow, which indicates how much load can be held without external fans. Its housing relies on natural convection, so the frame surface acts as the primary heat path instead of forced ventilation. Rotor position is reported through an incremental encoder with 2048 increments, enabling high-resolution feedback for drive current loops. The enclosure has an IP65 rating that protects the stator windings and bearings against dust and low-pressure water jets, allowing direct machine-frame mounting. The design is supplied without a holding brake, so axes that must remain locked at power-off need a mechanical clamp or drive-torque assist instead.
An F class insulation system permits winding temperatures up to 155 °C and matches the thermal behavior of the 058 coil group identified in the type code. Operation is specified between 0 to +40 °C ambient, and temperatures above that range may require derating or additional cooling capacity. That operating range suits indoor industrial installations with controlled ambient conditions. Motion is transferred through a plain shaft with a sealing ring, which provides an oil-tight barrier for gearboxes or couplings and helps protect the shaft exit area during operation.
Frequently Asked Questions about MHP093C-058-HG0-BNNNNN:
Q: What type of motor feedback does the MHP093C-058-HG0-BNNNNN provide?
A: This motor uses an incremental encoder with 2048 increments for feedback.
Q: What drive shaft configuration is featured on the MHP093C-058-HG0-BNNNNN motor?
A: The MHP093C-058-HG0-BNNNNN is equipped with a plain shaft and a sealing ring.
Q: What is the protection rating of the MHP093C-058-HG0-BNNNNN synchronous motor?
A: The protection category for this motor is IP65, offering substantial resistance to dust and water.
Q: Does the MHP093C-058-HG0-BNNNNN include a holding brake?
A: This motor does not include a holding brake as part of its design.
Q: What is the continuous torque at standstill for the MHP093C-058-HG0-BNNNNN with natural convection?
A: The continuous torque at standstill with natural convection ranges from 23.0 to 28.0 Nm.
