MHP093C-035-HP0-BNNNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911324178
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
6 Seconds
The Bosch Rexroth Indramat MHP093C-035-HP0-BNNNNN is part of the MHP Synchronous Motors series and features a keyed drive shaft with sealing ring and insulation class F. This motor has a protection rating of IP65 and operates in an ambient temperature range from 0 to 40 degrees Celsius. It offers continuous torque at standstill by natural convection between 23.0 and 28.0 Nm, and uses an incremental encoder with 2048 increments for motor feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHP093C-035-HP0-BNNNNN is a synchronous AC servo motor built by Bosch Rexroth Indramat for the MHP Synchronous Motors series. In automated machinery, this motor converts drive commands from digital amplifiers into controlled rotary motion for positioning, indexing, and cyclic load duties. Its electromechanical design suits packaging lines, material-handling axes, and general motion systems where closed-loop speed and torque regulation are required. The motor is intended for applications that need repeatable acceleration, stable velocity control, and dependable response during frequent start-and-stop operation.
The housing uses natural convection cooling, so heat is removed without an auxiliary fan. Under these conditions, the motor provides a continuous standstill torque of 23.0 to 28.0 Nm, which supports zero-speed load holding when the drive is energized. The enclosure has an IP65 rating, helping protect internal parts from dust and low-pressure water jets. The motor is designed to operate in ambient temperatures from 0 to +40 °C. Class F insulation supports winding temperatures up to 155 °C, and winding code 035 identifies the electrical configuration used with compatible drive modules. The motor size of 093 and length code C give it a moderate overall envelope for mid-range axis duties.
Position feedback is provided by an incremental encoder with 2048 increments, giving the drive fine motion data for accurate servo control. The output uses a keyed shaft with a sealing ring, which supports positive torque transmission while helping keep contaminants away from the bearing area. The motor is supplied without a holding brake, so any load that must remain fixed after power removal requires external holding capability. Electrical power is connected through a connector on side B, which can simplify cable routing when the motor is installed near machine frames or protective covers. This arrangement suits installations where compact wiring paths and direct coupling to driven components are both important.
Frequently Asked Questions about MHP093C-035-HP0-BNNNNN:
Q: What is the allowed ambient temperature range for the MHP093C-035-HP0-BNNNNN motor?
A: The MHP093C-035-HP0-BNNNNN operates reliably in ambient temperatures between 0 and +40°C.
Q: What is the continuous torque at standstill for the MHP093C-035-HP0-BNNNNN?
A: This model provides a continuous torque at standstill ranging from 23.0 to 28.0 Nm under natural convection.
Q: What type of drive shaft is used in the MHP093C-035-HP0-BNNNNN motor?
A: The drive shaft is configured as a keyed shaft and comes with a sealing ring for protection.
Q: What type of motor feedback does the MHP093C-035-HP0-BNNNNN provide?
A: This motor uses an incremental encoder with 2048 increments for feedback.
Q: Does the MHP093C-035-HP0-BNNNNN motor include a holding brake?
A: The MHP093C-035-HP0-BNNNNN is manufactured without a holding brake.
