Product Description:

The MHP093C-035-HP0-ANNNNN is a synchronous servo motor in the MHP Synchronous Motors series produced by Bosch Rexroth Indramat. It converts electrical energy from a compatible drive into controlled mechanical rotation for positioning tasks in automated machinery, conveyors, and machine-tool axes. Its design supports precise velocity and torque regulation in closed-loop motion systems. The motor is intended for applications that require repeatable rotary motion with stable response to changing command values and load conditions.

The motor delivers a continuous standstill torque of 23.0–28.0 Nm, giving machines steady holding force without exceeding thermal limits. A housing that relies on natural convection dissipates heat through the aluminum frame, so no external fan or liquid circuit is required. The enclosure carries an ingress protection rating of IP65, which blocks dust and low-pressure water jets and allows mounting outside a control cabinet in many industrial settings. Operation is specified for ambient temperatures between 0–40 °C, which suits typical indoor production environments. Rotor position feedback is supplied by an incremental encoder that produces 2048 increments per revolution, providing resolution suitable for standard drive interpolation and controlled axis movement.

The mechanical interface uses a keyed shaft with a sealing ring to help limit lubricant migration, and power enters through a connector on side A. This variant has no holding brake, so static load retention must be handled by the drive or by external locking hardware. Thermal endurance is supported by class F insulation, which permits winding temperatures up to 155 °C during intermittent overloads. The motor has a frame size of 093 and a length code of C, which gives it a longer active package within this housing size. The 035 winding code matches drive modules that can supply the required voltage constant for this motor.