Product Description:

The MHP093C-035-HG1-ANNNNN is a synchronous motor produced by Bosch Rexroth Indramat for the MHP Synchronous Motors series. It functions as a rotary actuator that converts servo-drive commands into controlled motion for positioning or feed axes in automated equipment. The motor uses a C-length housing, and its aluminum body dissipates heat through natural convection, so no external blower is required. A plain shaft with a sealing ring helps protect the internal bearings from dust and moisture during regular machine operation. This layout suits compact installations where direct motor mounting and stable thermal behavior are important.

The stator can produce a continuous standstill torque of 23.0 to 28.0 Nm, providing steady force for axes that remain under load at zero speed. Thermal operation is limited to an ambient range of 0 to +40 °C, so the motor should be used where surrounding machine temperatures stay within that span. The windings use insulation class F and are suitable for winding temperatures up to 155 °C. Electrical characteristics are set by winding code 035, allowing the matching servo amplifier to apply the proper current and voltage data. Power enters through a connector on side A, which keeps the connection layout straightforward and separates the main supply entry from the rotating shaft area.

The motor is equipped with a holding brake rated at 20.0 Nm, which helps keep vertical or intermittent-duty axes in place when power is removed. The housing is rated IP65, helping block dust and low-pressure water jets when the shaft sealing ring is installed. Position feedback comes from an incremental encoder with 2048 increments per revolution, giving the drive detailed motion data for closed-loop operation. The motor uses frame size 093, placing it in a mechanical envelope suited to medium-size servo applications. The brake and encoder are integrated within the motor, which keeps the external layout compact.