Product Description:

The MHP093C-035-HG0-BNNNNN is a synchronous servo motor produced by Bosch Rexroth Indramat in the MHP Synchronous Motors series. It serves as a rotary actuator that converts electrical energy into controlled torque and speed for positioning axes in automated assembly cells and packaging lines. The C-length, 093-frame format provides a moderate power density that fits tight machine envelopes, and the motor integrates directly with compatible drive controllers to execute closed-loop motion sequences in industrial automation. Its synchronous design lets the connected drive maintain accurate rotor alignment during rapid starts, stops, and short indexing moves.

The motor supplies a continuous standstill torque of 23.0 to 28.0 Nm and is cooled by natural convection, so no auxiliary blower is needed for rated output. An enclosure rating of IP65 protects internal components from dust and water jets, allowing installation on open equipment. That protection is useful on machine frames where splash and airborne debris may be present during normal operation. Position feedback comes from an incremental encoder with 2048 increments, giving the control loop the resolution needed for velocity and position regulation. The permitted ambient range is 0 to +40 °C for full-duty operation, and power conductors exit through a connector on side B to simplify cable routing in vertical or wall-mounted panels.

A plain shaft with a sealing ring delivers torque while the seal helps block lubricant leakage and contaminant ingress. Because the unit is supplied without a holding brake, static loads must be restrained by external mechanisms or drive torque once power is removed. Thermal endurance relies on insulation class F, which tolerates winding temperatures up to 155 °C during intermittent peaks. The electromagnetic layout identified by winding code 035 aligns coil resistance and inductance with compatible MHP drives, supporting stable current control during repeated acceleration and positioning cycles.