Product Description:

The MHP093C-035-HG0-ANNNNN synchronous motor is manufactured by Bosch Rexroth Indramat and is part of the MHP Synchronous Motors series. It is intended for servo axes that demand precise rotary motion in industrial automation, supplying controlled torque and speed directly to gearboxes, belt drives, or load shafts. When paired with a compatible digital drive controller, the motor supports closed-loop operation for accurate positioning and repeatable speed control across automated motion tasks.

Under natural cooling, the unit can deliver a continuous stall torque of 23.0 to 28.0 Nm, giving a stable margin for steady-state loads. The housing carries an IP65 ingress rating, which protects internal windings from dust and low-pressure water jets. Thermal performance is rated for environments between 0 to +40 °C, and rotor position is reported by an incremental encoder that provides 2048 increments per revolution, giving the controller a fine commutation reference and stable speed feedback. The windings use Class F insulation to tolerate elevated copper temperatures during intermittent overloads, and the electromagnetic properties correspond to winding code 035, which matches the resistance and inductance values used by compatible drive inverters.

A plain shaft with a sealing ring transfers torque while helping prevent lubricant migration, and the power connector is oriented on side A so wiring can exit in a consistent direction across a multi-axis assembly. With a frame size of 093, the motor shares mechanical interfaces with other units of the same size code. The housing relies on surface area rather than fans, while the C-length stack balances torque density against overall weight. No holding brake is fitted, so static load retention must be handled by the drive or by external mechanical means.