Product Description:

The MHP093B-058-HG1-BFNNNN is a synchronous servo motor produced by Bosch Rexroth Indramat for the MHP Synchronous Motors series. It converts electrical energy from a drive controller into regulated rotary motion for positioning and velocity control in automated machinery. Its 093 frame with B length suits medium-torque axes where installation space is limited, including packaging stations, palletizers, and articulated handling modules. This layout gives machine builders a compact motor option for applications that still require accurate speed regulation and repeatable axis movement.

With liquid cooling, the motor delivers a continuous standstill torque of 17.5 to 20.0 Nm, allowing sustained force output while heat is removed from the stator by circulating coolant. Position data come from an incremental encoder with 2048 increments, giving the controller fine angular resolution for closed-loop motion. Power enters through a connector on side B, which helps simplify cable routing when the driven load is located on the opposite face. An IP65 protection rating helps keep dust and water jets away from the internal windings, and the plain shaft includes a sealing ring to reduce lubricant leakage and contaminant entry. The motor also includes an integrated holding brake so the axis can remain secured when power is removed.

Operation is supported at ambient temperatures from 0 to +40 °C, and insulation of class F supports winding durability across that range. During machine stops, the built-in brake applies 20.0 Nm of torque to hold the shaft in place. The motor uses winding code 058, which corresponds to the current and commutation settings required by the matching drive. These characteristics make the unit suitable for transfer stations and assembly equipment that need stable holding behavior, controlled acceleration, and dependable servo response during repeated motion cycles.