Product Description:

The MHP093B-058-HG1-ANNNNN synchronous servo motor is produced by Bosch Rexroth Indramat and belongs to the MHP Synchronous Motors series. As a rotary drive element, it supplies controlled torque and speed to automated axes, conveying systems, and machine tools where coordinated motion is required. Integrated feedback and matched windings let the unit pair directly with Rexroth drive controllers, turning electrical commands into precise mechanical rotation for closed-loop industrial automation tasks. This arrangement supports repeatable starts, stops, and speed changes in motion systems that require accurate control.

Under natural cooling, the motor can deliver a continuous stall torque of 17.5 to 20.0 Nm, giving a steady load window without forced ventilation. The enclosure is rated IP65, so internal components remain protected against dust ingress and water jets during washdown or particle-laden processes. The allowable ambient range is 0 to +40 °C, so the motor can operate within normal industrial conditions without added cooling hardware. The drive shaft is supplied as a plain shaft with a sealing ring; the seal helps prevent lubricant leakage, and the smooth journal accepts standard couplings. Position and velocity are supervised by an incremental encoder with 2048 increments, enabling fine-resolution feedback to the connected drive.

Thermal energy is removed by natural convection, and a factory-installed holding brake provides 20.0 Nm of static torque to secure vertical or indexed loads when power is off. Electrical insulation is class F, which supports winding durability at elevated operating temperatures. Power cabling exits through a connector on side A, helping keep cable routing consistent in cabinets and machine frames. Winding code 058 matches the motor to the correct current profile from the controller. The motor uses size 093 stator laminations and a B-length housing for a moderate installation footprint.