Product Description:

The MHP093B-058-HG0-RNNNNN is a synchronous motor manufactured by Bosch Rexroth Indramat within the MHP Synchronous Motors series. It serves as the rotary element in industrial drive systems, converting controlled electrical power from a compatible servo amplifier into repeatable shaft torque for positioning, conveying, or process-line motion. The motor is housed in a sealed enclosure that helps protect internal components during operation in demanding factory environments. Its connector interface places the power leads on the right side of the stator frame, which can simplify cable routing on machines that use right-hand supply runs.

Under continuous stall load, the motor can hold 17.5 to 20.0 Nm while cooled only by ambient air moving across its natural convection ribbed frame. Operation is permitted in plant environments ranging from 0 to +40 °C, allowing installation alongside standard production machinery without supplemental climate control. Mechanical power is delivered through a plain shaft with a sealing ring, and there is no internal brake, so external holding must be provided when the load must remain fixed at standstill. The IP65 enclosure is dust-tight and resists low-pressure water jets, which supports use in dusty areas and wash-down zones.

Position feedback is supplied by an incremental encoder with 2048 increments, enabling fine speed regulation and digital commutation within the drive controller. The electromagnetic circuit uses winding code 058, which corresponds to the resistance and inductance group expected by compatible drive parameter sets, while frame size 093 identifies the stator diameter used across this motor platform. Length code B indicates the housing length for this frame size and supports a balance between inertia and torque density. Insulation class F supports winding temperatures up to 155 °C during intermittent overloads.