Product Description:

The MHP093B-035-HP1-BNNNNN is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MHP Synchronous Motors series. With a frame size of 093 and a length code of B, the unit fits installations that need moderate rotor inertia while still requiring precise closed-loop motion. Its synchronous design allows accurate coordination of torque, speed, and position when paired with a compatible servo drive. Integrated motor feedback is provided by an incremental encoder that sends position data to the drive, allowing the motor to execute repeatable moves in packaging lines, handling stations, and general factory automation across repeated duty cycles.

The motor delivers a continuous standstill torque of 17.5 to 20.0 Nm when cooled only by natural convection, so additional fans or liquid circuits are not required for rated output. A housing rated at IP65 blocks dust and low-pressure water jets, protecting the stator windings and bearings during routine washdowns. Position feedback is generated by an incremental encoder with 2048 increments, which provides fine resolution for velocity and position loops. Electrical characteristics follow winding code 035, indicating the electrical configuration used for this motor. Power is connected through a connector on side B of the stator, which can help keep cable routing organized in compact machine layouts.

The unit is equipped with a holding brake that clamps the shaft with 20.0 Nm of static torque, preventing back-driving on vertical axes when power is removed. Operation is permitted in ambient conditions from 0 to +40 °C, which suits standard indoor industrial environments. The motor uses a keyed shaft with a sealing ring, which transfers torque securely while helping keep lubricant inside the drive-end bearing and contaminants away from the bearing area. Thermal endurance is supported by insulation class F, allowing winding temperatures up to 155 °C before insulation damage becomes a concern.