Product Description:

The MHP093B-035-HG1-AFNNNN servo unit is manufactured by Bosch Rexroth Indramat as part of the MHP Synchronous Motors series. Intended for industrial automation, the motor supplies precisely regulated rotary motion to indexing tables, packaging axes, and material-handling gantries. Its electromagnetic design works with digital drive controllers to translate command signals into repeatable speed or position profiles, making it a core actuator where cycle accuracy and high throughput are required on the factory floor. This arrangement helps the motor respond quickly to changing load commands while maintaining stable motion during repetitive machine cycles.

The motor delivers a continuous standstill torque of 17.5–20.0 Nm, giving equipment enough static holding force while current and cooling remain within rated limits. It maintains full performance through an ambient range of 0 to +40 °C, so cabinet conditioning is not necessary in typical shop environments. Heat generated in the windings is extracted by liquid cooling, which stabilizes temperature under prolonged acceleration cycles. Rotor position is reported by an incremental sensor offering 2048 increments, enabling fine velocity loops in the drive. The motor is sealed to IP65, protecting the winding pack from dust and low-pressure water during washdown procedures.

The output side uses a plain shaft with a sealing ring, letting designers couple belts or gearboxes without a key while helping prevent oil migration. A spring-applied brake rated at 20.0 Nm secures the axis when power is removed, and supply conductors exit through a connector on side A to keep harnessing on the service face. Frame code 093 provides a standard flange pattern, and winding code 035 matches the stator resistance to standard Indramat inverter groups. The motor uses class F insulation, and the B-length body supports the dimensional layout for this frame size.