Product Description:

The MHP093B-035-HG0-AFNNNN is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MHP Synchronous Motors series. Designed for precision positioning and speed control, the unit interfaces with digital drive controllers to move tooling, conveyors, and handling axes in automated equipment. Its 093 frame size and B-length stator place it in the mid-range of the family, balancing torque output with a compact installation envelope for multi-axis machinery. This layout suits applications that need accurate motion without using an oversized motor body.

With natural convection, the motor delivers a continuous standstill torque of 17.5 to 20.0 Nm, allowing it to hold or slowly move loads without exceeding thermal limits. Its housing supports liquid cooling, so coolant circulation through the frame removes heat when duty cycles rise above what passive airflow can manage. Rotor position and speed are resolved by an incremental encoder with 2048 increments, giving the drive controller fine feedback for commutation and servo loops. A sealed enclosure rated IP65 prevents dust ingress and guards internal parts against low-pressure water jets during washdown. The permitted ambient range is 0 to +40 °C, which allows continuous operation within that surrounding air temperature range. This combination of cooling, feedback, and enclosure protection supports stable motion in enclosed machines and other demanding industrial settings.

Power is routed through a plug with a connector on side A, which can simplify cable routing along the axis. Torque is transferred by a plain shaft with a sealing ring, helping protect adjacent components from contamination at the shaft exit. The unit is supplied without a holding brake, so load retention during power-off conditions must be handled by the drive system or external hardware. The windings use insulation built to Class F limits, matching the 035 winding code and B-length stator for sustained thermal performance. This arrangement is useful where the machine already provides a separate braking or clamping method and where a sealed shaft output is preferred.